Reyax
RYS8830: Small form factor & Ultra Low Power 1.8V UART/I2C Interface GNSS Antenna Module
Small form factor & Ultra Low Power 1.8V UART/I2C interface GNSS antenna module
Artikelnummer VAR-827001976
Hersteller-Teilenummer: RYS8830
Taric/custom code: 85177900
Verfügbar für sofortigen Versand: ${ $store.getters.currentItemVariation.stock.net }
Voraussichtliche Versandverzögerung über den verfügbaren Bestand hinaus: 2 bis 4 Wochen
Artikel befindet sich in und wird versendet von: Riedlingen, Deutschland
11,85 EUR
*
Inhalt
1 Stück
Loggen Sie sich ein und erhalten Sie bessere Preise. Oder kontaktieren Sie uns und fragen Sie nach dem B2B-Status .
* Exkl. MwSt. exkl. Versandkosten
Description
The REYAX RYS8830 is built on the high performance of the SONY CXD5605AGF GNSS engine. The RYS8830 modules utilize concurrent reception of GNSS systems offering high sensitivity in a small SMD form factor.
◆ SONY CXD5605AGF Engine
◆ Small SMD form factor 121mm^2
◆ Enhanced GNSS Filter and Low Noise Amplifier
◆ Ultra-low power consumption
◆ Up to Position accuracy 1.0 m CEP
◆ Embedded Antenna
Art.-ID | 101661 |
Zustand | Neu |
Modell | RYS8830 |
Hersteller | Reyax |
Herstellungsland | Taiwan |
Inhalt | 1 Stück |
Gewicht | 110 g |
Netto-Gewicht | 100 g |
Features
Item | Min. | Typical | Max. | Unit | Condition |
---|---|---|---|---|---|
Power Supply Voltage | 1.75 | 3.3 | 3.6 | V | VBATT |
0.9 | 1.8 | 1.95 | V | VDD_LDO_IN |
GNSS continuous mode
Item | Min. | Typical | Max. | Unit | Condition |
---|---|---|---|---|---|
Satellite acquisition Current | 16 | 19 | mA | ||
Satellite tracking Current | 9 | 13 | mA | ||
Idle Current | 3.7 | mA | Waiting for command | ||
Sleep2 mode current | 200 | uA | |||
Satellite acquisition Current | 11.5 | mA | Use buck regulator | ||
Satellite tracking Current | 8.2 | mA | Use buck regulator | ||
Idle Current | 3.3 | mA | Use buck regulator | ||
Sleep0 mode current | 0.5 | mA | Use buck regulator | ||
Sleep1 mode current | 0.26 | mA | Use buck regulator | ||
Sleep2 mode current | 0.26 | mA | Use buck regulator |
GNSS low power mode
Item | Min. | Typical | Max. | Unit | Condition |
---|---|---|---|---|---|
Satellite tracking average current | 2.6 | 8.2 | mA | Use buck regulator @GSOP command Sleep1 and normal mode cycle | |
I2C slave | I2C clock : 400kHz Address length : 7 bits Slave address : 0x24 | ||||
Default Baud Rate | 115200 | bps | 8,N,1 | ||
Digital input level high | 0.7*VDD | VDD+0.3 | V | VIH | |
Digital input level low | -0.3 | 0.3*VDD | V | VIL | |
Digital output level high | 0.8*VDD | VDD | V | VOH 2mA | |
Digital output level low | 0 | 0.2*VDD | V | VOL 2mA | |
Flash size | 8 | M-bit | |||
GNSS Center Frequency | 1561.098 1575.42 1602.5625 | MHz | BeiDou GPS Glonass | ||
Navigation update rate | 1 | Hz | |||
Accuracy | 1 | M | Signal strength is -130dBm | ||
Cold starts | 35 | Sec. | Signal strength is -130dBm | ||
Hot starts | 1 | Sec. | |||
Tracking Sensitivity | -161 | dBm | |||
Hot starts Sensitivity | -160 | dBm | |||
Cold starts Sensitivity | -147 | dBm | |||
Operating Temperature | -40 | 25 | +85 | ˚C | |
Dimensions | 11mm*11mm*2.2mm | ||||
Weight | 0.43 | g |