Description

The NTP001 is a stratum-1 Teltonika NTP server designed for synchronizing accurate, UTC-traceable time in both public and private networks, without the need of Internet access. Utilising its GNSS capabilities, this low-cost NTP server maintains precise, UTC-traceable time. Plug-and-play functionality, a wide variety of interfaces including RS232 and RS485, and a robust security profile all make the NTP001 the perfect NTP server for your network.

Network Time Synchronization

Accurate and low-cost NTP server

Multiple Interfaces

Featuring RJ45, RS232, RS485 and I/Os

Security

Authentication, access control & more

Plug-and-play

Simple installation & configuration at minimum effort

Standard package contains

NTP001 GNSS NTP Time Server
16-pin terminal block
QSG (Quick Start Guide)
Packaging box

Standard order codes

Product code	HS code	HTS code	Package contains
NTP001000000	851762	8517.62.00	Standard package

ID articolo	102767
Condizione
Modello	NTP001000000, NTP001 000000
Produttore	UAB Teltonika Networks
Paese di produzione
Contenuto	1 undefined
Peso netto	180 g
Dimensioni	83×25×83mm

Features

ETHERNET
LAN	1 x LAN port, 10/100 Mbps, compliance with IEEE 802.3, IEEE 802.3u, 802.3az standards, supports auto MDI/MDIX crossover
NETWORK
Network protocols	TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, SSL/TLS, ARP, SSH, DHCP, SNMP, MQTT
Connection monitoring	Ping Reboot, Wget Reboot, Periodic Reboot
Network topology	Visual representation of your network, showing which devices are connected to which other devices
DDNS	Supported >25 service providers, others can be configured manually
SECURITY
Authentication	Pre-shared key, digital certificates, X.509 certificates, TACACS+, Internal & External RADIUS users authentication, IP & login attempts block, time-based login blocking, built-in random password generator
WEB filter	Blacklist for blocking out unwanted websites, Whitelist for specifying allowed sites only
Access control	Flexible access control of SSH, Web interface, CLI and Telnet
802.1x	Port-based network access control client
NTP
Supported modes	Server - Receive time from GPS and act as a NTP server to broadcast time for other devices (Stratum 1). Broadcast time through UDP or over Serial (RS232, RS485)
Daytime Protocol	TCP/UDP
Date over Serial	RS232/RS485
NTP	NTPv4, NTP authentication (MD5/SHA1), Unicast/Multicast/Broadcast mode
Protocol	NTP Stratum 1 Time Server (NTPv4)
NTP Accuracy	Ethernet NTP ±1ms overall
NTP Performance	>300 NTP requests per second (wire speed)
Synchronization Accuracy	LAN synchronization typically 1–10ms
MODBUS
Supported modes	Server, Client
Supported connection types	RTU (RS232, RS485), TCP
Custom registers	MODBUS TCP custom register block requests, which read/write to a file inside the router, and can be used to extend MODBUS TCP Client functionality
Supported data formats	8-bit: INT, UINT; 16-bit: INT, UINT (MSB or LSB first); 32-bit: float, INT, UINT (ABCD (big-endian), DCBA (little-endian), CDAB, BADC), HEX, ASCII
MQTT Gateway
Modbus MQTT Gateway	Allows sending commands and receiving data from MODBUS Server through MQTT broker
API
Teltonika Networks Web API (beta) support	Expand your device's possibilities by using a set of configurable API endpoints to retrieve or change data. For more information, please refer to this documentation: https://developers.teltonika-networks.com
MONITORING & MANAGEMENT
WEB UI	HTTP/HTTPS, status, configuration, FW update, CLI, troubleshoot, multiple event log servers, firmware update availability notifications, event log, system log, kernel log, Internet status
SSH	SSH (v1, v2)
SNMP	SNMP (v1, v2, v3), SNMP Trap, Brute force protection
JSON-RPC	Management API over HTTP/HTTPS
MODBUS	MODBUS TCP status/control
SYSTEM CHARACTERISTICS
CPU	Mediatek, 580 MHz, MIPS 24KEc
RAM	128 MB, DDR2
FLASH storage	16 MB, NOR Flash
FIRMWARE / CONFIGURATION
WEB UI	Update FW from file, check FW on server, configuration profiles, configuration backup
Keep settings	Update FW without losing current configuration
Factory settings reset	A full factory reset restores all system settings, including the IP address, PIN, and user data to the default manufacturer's configuration
INPUT / OUTPUT
Input	3 x Digital Input, 0 - 6 V detected as logic low, 8 - 30 V detected as logic high
Output	3 x Digital Output, Open collector output, max output 30 V, 300 mA
POWER
Connector	2-pin in 16-pin industrial terminal block
Input voltage range	9 - 30 VDC, Overvoltage protection, Reverse polarity protection, Surge protection +/- 1kV 50 uS Max
Power consumption	Idle: < 2 W, Max: < 3.5 W
PHYSICAL INTERFACES
Ethernet	1 x RJ45 ports, 10/100 Mbps
I/O’s	3 x Configurable I/O, 1 x Analog input in 16-pin terminal block
Status LEDs	1 x Power, 2x GNSS status LEDs, 1x NTP Server status LED, 3 x IO status LEDs
Power	1 x 16-pin terminal block
Antennas	1 x SMA for GNSS
Reset	Reboot/User default reset/Factory reset button
RS232	4-pin in 16-pin terminal block (TX, RX, RTS, CTS)
RS485	4-pin in 16-pin terminal block (D+, D-, R+, R-)
PHYSICAL SPECIFICATION
Casing material	Anodized aluminum housing and panels
Dimensions (W x H x D)	82.6 x 25 x 83 mm
Weight	180 g
Mounting options	DIN rail, wall mount, flat surface (all require additional kit)
OPERATING ENVIRONMENT
Operating temperature	-40 °C to 75 °C
Operating humidity	10% to 90% non-condensing
Ingress Protection Rating	IP30

Available versions

Product code	Supported frequencies	Standard order code / Package Contains
NTP001 0*****	N/A	NTP001000000 / Standard package

NTP001 + SDK + 1 RMS